Disclaimer: This process will completely wipe any remaining data on the flash drive. It is a tool for hardware recovery, not data recovery.
Click the or Configuration button on the right side. If prompted for a security password, leave the field blank and hit enter. Select the default AlcorMP.ini profile template.
When your USB flash drive suddenly stops working, showing up as "No Media" or "0 Bytes," it can be frustrating. For many users, tools like reveal a specific technical signature: Chip Vendor: Alcor Micro and Controller Part-Number: Unknown [FA00] - F/W 3613 .
: Use a utility like ChipGenius or Flash Drive Information Extractor to find the precise Controller Model (e.g., AU6989SN-GTC) and Flash ID (FID). alcor micro unknown fa00 f w 3613 updated
⚠️ : If the tool reads Flash ID: None or no FID , the controller has physically lost connection with the NAND legs. You may need to manually kick the drive into Test Mode (hardware shorting) before proceeding. Step 2: Download the Correct AlcorMP Tool Version
Alcor Micro controllers are common in many affordable or promotional USB drives. The "Unknown [FA00]" error typically triggers when:
AlcorMP (Последняя версия ALCOR U2 MP v23.08.07.00.H) Disclaimer: This process will completely wipe any remaining
Alcor Micro controllers are highly selective about software revisions. Using an outdated version will result in errors like "Too many bad block error" .
Note: Immediately unplug the flash drive from the physical port first, and only then close out the AlcorMP utility program to prevent data caching conflicts. Hardware Fallback: Forcing Hardware Test Mode
Your PC still detects the Alcor Micro interface hardware. If prompted for a security password, leave the
Use a sewing needle or a fine-tipped pair of tweezers to short-circuit the data pins (typically pins 29 and 30) on the NAND flash chip.
Locate your USB drive in the list and look at the (e.g., AU6989SN, AU6998AN, etc.) and the Flash ID Code (FID) .