Drives newer than 2023 (with 176-layer or 232-layer NAND) still won't work with this 2022 patch. For those, you need the FC1179 or SM3282 tools.

Rescuing "Dead" USB Drives: FirstChip FC1178BC MPTools (2022 Patched)

| Error Message | Solution in Patched 2022 Version | | :--- | :--- | | | Open Setting.set in Notepad. Change CheckDBF=1 to CheckDBF=0 . | | "Chip mismatch" | In the "Force Flash" tab, manually select FC1178BC_Ultra_2022.set (patched list). | | "Read ID fail" | Your drive is in low power mode. Use a powered USB hub. | | "Download ISP fail" | The NAND is too slow. Switch to USB 2.0 port and retry. |

: As a "patched" tool from third-party forums, it frequently triggers antivirus software as a "False Positive" or potentially carries real risks.

Standing for "Mass Production Tools", this software bypasses operating system limitations to re-program the controller. It flashes a fresh copy of vendor firmware, runs deep hardware-level diagnostic scans, and blocks out degraded memory sectors.

: The UI is industrial and dated, typical of Chinese mass-production tools. It is not user-friendly for beginners; one wrong setting (like "ECC" or "Scan Mode") can permanently brick the drive.

Restores the drive to its original capacity after it has been corrupted or reduced (e.g., from a counterfeit drive).