: Connect the supplied AM loop antenna and FM wire antenna to the rear terminals for radio reception [9]. 2. Initial Setup & Speaker Calibration
Let me know your setup details so I can provide customized connection steps. AI responses may include mistakes. Learn more Share public link
100 Watts per channel (Front, Center, Surround, and Subwoofer) Audio Formats Dolby Digital Dolby Pro Logic II dts Digital Surround Inputs and Outputs Digital: 1 Optical Input, 1 Coaxial Input Analog Audio: CD, MD/Tape, DVD, Video 1, Video 2
Includes digital (coaxial and optical) and multiple analog (SA-CD/CD, DVD, Video 1, Video 2) connections. sony str k670p manual
What (TV, gaming console, PC) are you trying to connect?
: Connect speakers with impedances of 6 to 16 ohms [19]. Ensure all wires are firmly seated to avoid humming or "Protect" errors [10].
Strip roughly half an inch of insulation off your speaker wires. Insert the bare wire into the spring-loaded clips on the back of the receiver. Ensure you match Positive (+/Red) to Positive and Negative (-/Black) to Negative. Incorrect polarity causes thin sound and a lack of bass. Step 2: Connecting Media Sources : Connect the supplied AM loop antenna and
buttons simultaneously for about 3-5 seconds until the display shows "CLEARED" or "INITIAL". Protector Error
| Specification | Detail | | --- | --- | | | Sony STR K670P | | Type | Stereo FM/AM Receiver | | Power Output | 100 Watts per channel (RMS at 8 ohms, 1kHz, 10% THD) | | Frequency Response | 20Hz – 20kHz | | Inputs | CD, Tape (Play/Rec), Video/Aux, Phono (MM) | | Outputs | 2 Speaker pairs (A/B), Tape Rec Out, Headphone (6.35mm) | | Tuning | Digital synthesized PLL (30 presets) | | Surround Modes | Dolby Pro Logic (via rear output), 3D Phantom, Hall, Simulated Stereo | | Dimensions | 430 x 145 x 315 mm | | Weight | Approximately 6.5 kg |
Connect your source device (DVD player, gaming console, or TV) using the Optical or Coaxial digital inputs. Standard red-and-white RCA cables can only transmit 2-channel stereo, whereas digital connections unlock true 5.1 Dolby Digital and DTS. AI responses may include mistakes
Connect the optical output of a CD player or gaming console to the port.
If the system is glitching, you can often perform a hard reset by holding the button and INPUT SELECTOR
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.