Weierwei Vev-3288s Manual [upd] -

| Terminal | Label | Default Setting (Manual Page 23) | | :--- | :--- | :--- | | 6 | AI1 | Universal Input (Default: 0-10V for pressure sensor) | | 7 | AI2 | Universal Input (Default: 4-20mA for temperature) | | 8 | GND | Analog Ground |

:

Using the keypad, type in your desired frequency. For example, for a VHF frequency of 146.520 MHz, type: 1 , 4 , 6 , 5 , 2 , 0 . Step C: Set CTCSS / DCS Tones (If Required) Weierwei Vev-3288s Manual

Keep it OFF unless you are using a headset, as ambient wind or loud noises can accidentally trigger transmissions. 5. Step-by-Step Programming Guide

Use the keys to select an empty channel number (001–128). Press the [CH] or [ENT] key to confirm and save. 4. Locking the Keypad | Terminal | Label | Default Setting (Manual

Mount device with specified clearances and connect protective earth.

Below is an informative guide to the device's essential functions, based on the manual's core sections. 1. Getting Started Power On/Off & Volume: based on the manual's core sections.

Bypasses the squelch setting to check for weak signals on the current frequency or channel.

Turn clockwise to switch the radio on and increase volume. Turn counter-clockwise to decrease volume and turn the radio off.